高效液相-电化学检测法研究针刺对家兔血浆及脑组织中单胺类神经递质的影响

 通过高效液相 电化学检测法测定了电针刺激家兔肾旁穴前后其血浆及脑组织中单胺类神经递质去甲肾上腺素 (NE)、肾上腺素 (E)、多巴胺 (DA)和 5 羟色胺 (5 HT)含量的变化 ;研究了神经递质的变化与家兔繁殖能力的关系。该实验采用ODS柱 ,流动相为V(0 0 2mol/L柠檬酸三钠 0 0 5mol/L磷酸氢二钠 )∶V(甲醇 ) =95∶5的溶液 ,用电化学检测器检测。实验证明 ,血浆及脑组织中NE ,E ,DA和 5 HT的含量在针刺肾旁穴前后都有了显著的变化 ,说明针刺能激发家兔脑内神经元的活动 ,导致相应的递质含量的变化 ,同时使得血浆中相应含量也发生变化。     

Quantitation in capillary gas chromatography with emphasis on the problems of sample introduction

Sampling techniques for practical quantitative capillary GC have to meet certain principal requirements. Both the absolute and the relative peak areas (e.g. column loads) must be reproducible with high precision and at high accuracy; discrimination of certain constituents according to their volatility should not take place on sampling. On the basis of systematic studies, the three most reliable sampling techniques used for GC analyses with the aim of achieving precise and accurate quantitative data proved to be the following: On-column, injection, splitless PTV injection, and an optimized version of split sampling called “cooled needle split” injection. The on-column technique can be optimized by using precolumns with wider internal diameters and without stationary phase coatings to overcome the problems of large liquid sampling volumes and for automation. The PTV technique should only be used in the splitless mode because discrimination cannot be suppressed completely with the split mode. All three of the techniques can be operated automatically, either to avoid “human interference”, i.e. to improve precision or for unattended operation to save man-power.     

几种煤沥青热转化过程的对比

几种煤沥青热转化过程的对比冯映桐，水恒福，袁晓敏（华东冶金学院，马鞍山２４３００２）关键词　煤沥青，热转化，针状焦原料用于制取炼钢用超高功率电极的针状焦，其原料煤沥青的组成和性质首先要满足要求。本文选择了典型的五种煤沥青籍离心法预处理把影响热转化过程...     

Application of the “cooled needle” technique to split and splitless sampling onto capillary columns

Cooled needle sampling using syringes was applied to splitless injection and to simulated distillation analyses. Slight changes of the construction of the previous device are also described. The changes concern the temperature profile within the injector and especially the vaporization insert. Even with the low carrier gas flow through the injector during splitless injection, discrimination by component volatility can be avoided. Precision and accuracy of simulated distillation data obtained with split sampling also can be improved by the cooled needle technique.     

Needle-Trap Device (NTD) Packed with Reduced Graphene Oxide (rGO) for Sample Preparation Prior to the Determination of Polycyclic Aromatic Hydrocarbons (PAHs) from Aqueous Samples by Gas Chromatography–Mass spectrometry (GC-MS)

A needle trap device (NTD) was developed for the extraction of polycyclic aromatic hydrocarbons (PAHs) from liquid samples followed by determination by gas chromatography–mass spectrometry (GC-MS). The extraction was performed using the dynamic sampling approach, in which a liquid sample was pumped through the system. Due to the flexibility and softness of graphene, its application in NTD may be difficult. Herein, the effectiveness of reduced graphene oxide (rGO) packed in NTD in dynamic extraction of PAHs was evaluated. Several experimental parameters, such as the adsorbent mass, eluent type and its volume, as well as the sample volume were optimized to achieve satisfactory performance for dynamic extraction. Comparative studies showed that the extraction performance of rGO-NTD was better than using NTDs packed with other sorbents such as activated carbon. The recovery rate for reduced graphene oxide exceeded 92%. Comparison of dynamic and headspace sampling showed comparable results but the dynamic mode is more suitable for field measurements. The recovery rates of PAHs spiked in water samples were from 76.5 to 100.2% and the relative standard deviation values were from 2.7 to 7.5% under the optimal conditions. This work reveals the potential of NTD with a graphene-based material for sample preparation before chromatographic analysis of liquid samples.     

Electrochemical behavior of tantalum(V) oxide in chloride-fluoride melts

Electrochemical behavior of KCl-KF-Ta₂O₅ melts is studied by cyclic voltammetry. It is a Ta(V) oxyfluoride (KTaO₂F₂, K₃TaO₂F₄, or K₃TaOF₆), yielded by the Ta₂O₅-KF interaction in the melt, that presumably participates in the electrochemical process, rather than Ta₂O₅ proper. The Ta(V) oxyfluoride complex is reduced to tantalum metal at 973 K via three irreversible diffusion-controlled stages. The product of the electrokinetic transfer coefficient and the number of electrons participating in the third stage is determined. The Ta(V) reduction becomes one-staged at 1073 K. Tantalum-containing ternary systems with molybdenum, cobalt, or silicon are prepared by electrolyzing Ta₂O₅-containing melts.     

基于广义线性模型的针刺足三里脊髓背根神经活动解码

神经系统以时空编码形式刻画外部刺激信息, 针刺作为对穴位的机械作用可以等效为对神经系统的一种外部刺激. 为了揭示神经系统如何表达和传递针刺作用, 本文设计了不同频率的针刺动物实验, 即在针刺大鼠足三里穴位时获取脊髓背根神经节电信号. 首先, 经过数据预处理获得单神经元动作电位序列并转化为点过程序列. 其次, 应用广义线性模型(GLM)编码针刺作用, 产生模拟的神经放电序列. 另外, 在模型基础上应用贝叶斯解码, 根据神经放电序列重构针刺随时间变化的位移波形. 最后, 基于时间重标度理论应用分位数分位数(Q-Q)图方法检验编码模型与点过程数据的一致性. 结果表明, GLM能够模拟针刺神经编码, 并正确解码针刺信息. 本文为针刺研究提供了新的视角, 对于构建神经系统与机器接口以改善针刺的临床研究具有潜在意义. 关键词： 针刺 点过程 广义线性模型 神经解码     

Microsampling and Determination of Metals in Iron Gall Ink

Abstract

Iron gall ink contains transition metals such as Fe, Cu, and Mn which are known to catalyze chemical reactions in support materials such as paper and parchment, which eventually leads to their deterioration over time. Identification of metals in ink can be an important step prior to the conservation treatment of a written document. In this work, syringe needles (16G–23G) were used to sample micro-cores (～0.7 mm in diameter) of ink and paper prior to analysis. Metals were extracted from the micro-core with HNO₃, prior to analysis using graphite furnace atomic absorption spectroscopy (GFAAS).     

Measurement of the viscoelastic properties of bituminous materials using an oscillating needle technique

An embedded oscillating needle is used to measure the dynamic viscoelastic properties of a stiff bituminous material. A Micro-Fourier Rheometer was used to cause the embedded needle to undergo pseudorandom small amplitude oscillations in the axial direction with measurement of the instantaneous resistance force. The phase and magnitude of the force signal are used to calculate the storage and loss moduli. A theoretical framework for this technique is developed from the Mindlin solution coupled with slender body theory, and the correspondence principle of linear viscoelasticity. Experiments are performed on neat bitumen binders as well as mixtures of glass spheres in bitumen; the results show that the presence of the glass spheres dramatically increases the viscoelastic response functions. The results agree reasonably well with those obtained using the parallel plate squeezing mode. Received: 31 March 1999 Accepted: 14 July 1999     

Characteristics analysis of acupuncture electroencephalograph based on mutual information Lempelben-Ziv complexity

As a convenient approach to the characterization of cerebral cortex electrical information, electroencephalograph (EEG) has potential clinical application in monitoring the acupuncture effects. In this paper, a method composed of the mutual information method and Lempel-Ziv complexity method (MILZC) is proposed to investigate the effects of acupuncture on the complexity of information exchanges between different brain regions based on EEGs. In the experiments, eight subjects are manually acupunctured at ‘Zusanli’acupuncture point (ST-36) with different frequencies (i.e., 50, 100, 150, and 200 times/min) and the EEGs are recorded simultaneously. First, MILZC values are compared in general. Then average brain connections are used to quantify the effectiveness of acupuncture under the above four frequencies. Finally, significance index P values are used to study the spatiality of the acupuncture effect on the brain. Three main findings are obtained: (ⅰ) MILZC values increase during the acupuncture; (ⅱ) manual acupunctures (MAs) with 100 times/min and 150 times/min are more effective than with 50 times/min and 200 times/min; (ⅲ) contralateral hemisphere activation is more prominent than ipsilateral hemisphere's. All these findings suggest that acupuncture contributes to the increase of brain information exchange complexity and the MILZC method can successfully describe these changes.